Basic Front Engine or Rear Engine Dragster Chassis


Starting at $11,250.00

CHASSIS INCLUDES: (Where Applicable)
  • Wheelbase Set to Customer requirements
  • 4130 Chromoly fixture Welded Chassis
  • 'A' Frame Welded Front End 
  • Spindles 
  • Rack & Pinion or Drag Link Style Steering Box 
  • Steering Linkage 
  • Steering Column 
  • Neil and Parks Butterfly Steering Wheel
  • Front to Rear body Panels (rear engine) w/Formed Aluminum Nose Piece; Front engine -standard shorty body
  • Floor Pan 
  • Entry/ Exit Assist handles
  • Lower Aero Lip
  • Lexan Windscreen 
  • Aluminum Front and Rear Protection Plates
  • Strange Aluminum 9" Ford Rearend Housing 
  • Strange Engineering 35 Spline Axles w/bearings 
  • 5/8" Axle Studs Fill & Drain Plugs on Rearend Housing 
  • Anti-rotation Device
  • Light Weight DZUS Tabs
  • Aluminum DZUS buttons
  • Lateral Engine Limiters 
  • Front Ballast Mounts 
  • Throttle Pedal and Mount 
  • Brake Pedal and Mount 
  • Wilwood Master Cylinder and Mount 
  • Brake Line Tab 
  • Aluminum Fuel Tank w/Fittings & Mount
  • Fuel Pump Mount 
  • Parachute Mount and Anchor 
  • Parachute Handle and Mount
  • Ignition Plate and Mount 
  • Tach & Gauge Mounts 
  • Switch Panel 
  • Battery tray 
  • Master Disconnect Switch Mount 
  • Aluminum Seat w/Seat belt Slots 
  • Seat Belt & Shoulder Harness Mounts
  • Aurora Rod ends 
  • Grade 8 Bolts Used Throughout 
  • Front & Rear 1/4" 6061-T6 Aluminum Engine Plates
  • Tow Hooks
  • Roll cage loop can be single bend "round" loop or double bend "square" loop...your choice.
  • FINANCIAL TERMS: 
    • 50% Down
    • 50% Upon Completion

Popular Options for Dragsters (Add to cost of base car)

  • Wilwood Rear Disk Brakes w/o Drilled Rotors
  • Wilwood Disk Brakes w/Drilled Rotors
  • Strange carbon fiber brakes
  • Route Brake Lines Inside Frame Rails
  • Large Capacity Fuel Tank
  • 9" strange engineering Aluminum Center Section, Coupler & Gears
  • Strange Engineering Aluminum Spool
  • Gun Drilled Rear Axles
  • Special ceramic ball bearing upgrades/conversions
  • Powder Coat seat, floor and Bulkhead
  • Powerglide to engine Adapter Plate for Chrysler, Ford, etc
  • Pro Shifter Air or Elec.& Mount & cable
  • Parachute & Throttle Cable w/ends
  • Computer mount
  • Acess doors installed
  • NACA ducts installed
  • Aluminum Radiator & Electric Fan Installed
  • Wheelie Bars (60" long)
  • NACA duct Each Installed (Large)
  • NACA duct Each Installed (Small)
  • Master Disconnect Switch
  • Rear Wing
  • Rear Wing Mounts w/Streamline tube Struts
  • Chrome Misc. Parts
  • Goodyear Front & Rear Tires- any size
  • SFI Chassis Certification
  • Removable Front 'A' Arms
  • Clutch pedal with linkage for Crowerglide
  • Clutch pedal with linkage for pedal clutch
  • Stange 40 spline floaters
  • Calipers for above floaters with pads
  • Add for large capacity nitro fuel tank with high flow LARGE aluminum line
  • Add for full hand-formed aluminum body from nose to front of engine
  • Add for mag body with aluminum nose and panel in front of engine
  • Front canard wings
  • Rear canard wings

Other options available for any chassis type.  Please call us with your needs or requirements.  All prices are FOB Burlingame, KS.  P.O.R.=Price On Request

Site design by Drag Strip Girl Designs

Neil & Parks Racing Ent.

All logos and images are reserved.