New and Used Small Block Chevy & Miscellaneous Parts for Sale 

  Winter Garage Sale

 

New Pistons

12- New 4.125 bore CP Pistons for 14 degree heads. .043 .043 3mm ring grooves 1.260 comp. height. .927 x 2.500 pin bore, double spiral lock.                                                                                               $500.00

1- New BME #66 forging blob dome, 4.194 bore, 1.250 comp. height, .3mm oil ring .550 down, Job #34501, .927 x 2.500 pin bore, double spiral lock.    $30.00                                                                                                                                          

1- New BME #66 forging, 4.155 bore, 1.395 comp. height, .3mm oil ring .550 down, coated skirt, .927 x 2.500 pin bore, double spiral lock. Dome profiled for #1,5,4,8 on 14 degree wedge Chevy.    $20.00

2- New BME #66 forging, 4.160 bore, 1.289 comp. height, .3mm oil ring .550 down, Job #35046, .927 x 2.500 pin bore, double spiral lock. Dome profiled for 14 degree wedge chevy, one left and one right.    $20.00 each

Valve Train Parts

1 new- Manley titanium valve 2.200 dia, 5/16 stem, 5.555 OAL, .250 tip, beadlock             $25.00

1 new- Manley titanium valve 1.630 dia, 5/16 stem, 5.720 OAL, .290 tip, beadlock             $25.00

4 used- Titanium valves 2.290 dia, 5/16 stem, 5.660 OAL, .300 tip, beadlock                     $75.00 

16 used- Titanium valves 1.610 dia, 5.640 long, 11/32 stem, bead loc, .290 tip, hardened tip, Del West Exhaust Valves   $200.00/ set  $350.00/ all

28 used- PSI 1250 or similar Valve Springs 375 lbs. minimum @ 2.150                             $150.00

8 used- T&D Rockers, 1.75 ratio, 1.680 pivot length, .180 offset fits exhaust on 14/15/18 degree Chevy (4 left and 4 right)     $200.00

15- new Valve Guides, 11/32 x .503  1.875 under head length                 $30.00

Camshafts

1 new regrind-  Bullet reground Crane  280/289 @.050  .483 int. lobe/.477 exh. lobe   112 cl  55mm journal   std. firing order .750 roller                                                                                                              $300.00

1 new- Bullet  288/292 @ .050  .485 int. lobe/.460 exh. lobe   111  cl   55mm journal  7-4 swap firing order  .750 roller                                                                                                                                         $350.00

1 used- Bullet 284/292 @.050  .500 int. lobe/ .480 exh. lobe  112 cl  55mm journal   .750 roller $200.00

1 used- LSM 288/294 @.050  .506 int. lobe/ .500 exh. lobe  115 cl  55mm journal   One lobe hurt, needs slight regrind, .750 roller                                                                                                                         $100.00

1 used- Bullet 280/290 @ .050  .460 int. lobe/ .450 exh. lobe  114 cl 55mm journal, .750 roller $200.00

 

Used Pushrods

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Qty.

Length

Diameter

Wall

Weight

End style/size (radius)

Make

12

6.590

5/16

.065?

36

5/32 ball 180 degree

?

10

7.250

3/8 to 7/16 D/T

0.065

70

5/32 ball 210 degree

ISC

2

7.300

3/8 to 7/16 D/T

0.065

71

5/32 ball 210 degree

ISC

10

7.990

1/2

0.188

169

5/32 ball 210 degree

Manton

10

8.040

7/16 to 3/8 S/T

0.168

121

5/32 ball 210 degree

Manton

16

8.300

7/16 to 3/8 S/T

0.120

109

5/32 ball 210 degree

Manton

12

8.300

7/16 to 3/8 S/T

0.168

125

5/32 ball 210 degree

Manton

10

8.540

7/16 to 3/8 S/T

0.120

112

5/32 ball 210 degree

Manton

10

8.550

3/8

0.080

 

5/32 ball 180 degree

Manley

10

8.550

3/8

0.095

94

5/32 ball 210 degree

Manton

10

8.600

3/8

0.095

89

5/32 ball 210 degree

Manton

10

8.650

1/2 to 3/8 mostly 1/2"

0.188

171

5/32 ball 210 degree

Manton

19

8.700

7/16 to 3/8 S/T

0.168

134

5/32 ball 210 degree

Manton

10

8.700

1/2 to 7/16-3/8 D/T

0.188

156

5/32 ball 210 degree

Manton

10

8.750

7/16 to 3/8 S/T

0.168

132

5/32 ball 210 degree

Manton

5

8.750

3/8

0.095

92

5/32 ball 210 degree

Manton

13

8.900

7/16 to 3/8 S/T

0.120

120

5/32 ball 210 degree

Manton

16

9.150

3/8

0.080

 

5/32 ball 180 degree

Manley

15

9.150

3/8

0.080

 

3/16 ball 180 degree

Manley

Pushrods are $10.00 ea.

Short Block Parts

6 new- 55mm roller bearings, INA HK5520, 20 mm wide                                                   $70.00

10 used- 55mm roller bearings, INA HK5520, 20 mm wide                                                 $50.00

1 set new- Dura-Bond GMP-12T cam bearings coated (Big M)                                          $30.00

1 set new- Clevite MS-909H Main bearings (350 Chevy Std.)                                           $50.00

1 set new- Copper head gaskets 4.165 x .038 SBC with water holes                                 $50.00

1 set new- SCE Titan self seal water holes, copper gaskets 4.155 x .043 SBC       #T11154  $50.00

5 new gaskets- Copper head gaskets 4.155 x .051 SBC with water holes                          $20 each

1 set new- 1/8? intake spacers for BBC rectangular port heads                                        $20.00

1 set new- SCE #4111 copper exhaust gaskets for 14/15/18 degree SBC                           $20.00

14 new- SBC front cover gaskets                                                                               $3.00 each

Miscellaneous Parts

2 new sets- Moroso #37390  Offset head dowels for SB Chev & SB Chrysler .030         $5.00 set

Many new- 392 Chrysler cylinder head water block offs                                          $10.00 ea

2-used sets of rare 3.150? throttle bodies off Engler Fuel Injector.  Small Block Chevy Layout, but would work great on top of a tunnel ram on any other engine.  Has bodies, shafts, butterflies, and short stacks.  Manifolds for Stack Injection setup also available.  Ask for  details.  $1000.00 set

8- new billet nuts, ?-20, 3? tall with 3/8 hex on top, perfect for valve covers                  $25.00

12- new 3.250 spool bearing adjusters for Strange thirdmembers                                   $5.00 each

1- new 2 PSI Wilwood residual pressure valve                                                            $10.00

2- new JFZ 7/8 Master Cylinder rebuild kits, yes JFZ!!!---for restoring something retro from the 80?s   $20 each

2- new 3 ?? x 10? collector extensions, slip on                                                           $10.00

2- new 3 into 1 Slip on collectors, 2 1/8? x 3 ??                                                          $30.00

12? Reflective fuel line insulation, Velcro down the length, fits 1 ? tubing                          $20.00

1- New Oldsmobile or 8 ? Chrysler Spool bearings and races 3.265?                                 $30.00

2- new Oil pressure plates for 331/354/392 Chrysler, straight out                                    $10 each

1- new Oil pressure plate for 331/354/392 Chrysler, angled forward for dragster use            $25.00     

4- used 32 tooth oil pump pulley 8mm HTD                                                                 $10.00 each

1- used 28 tooth Gilmer oil pump pulley                                                                      $10.00

3- new Peterson # 06-0734 2 ?? OD Splined guide washer                                          $4.00 each

1- new Peterson # 06-0742 ?? long splined mandrel spacer                                           $5.00

3- used SBC aluminum drive mandrels, 1? w/ 1/8? key type, 1 7/8? long                         $7.50 each

3- new Peterson #15-1109 #16 oval port fittings                                                          $40.00 each

1- new Spicer #5-627x U-Joint                                                                                  $20.00

1- new Neapco #2-4900 U-Joint                                                                                 $5.00

2- CO2 Bottle valves, 1 for 10 oz, 1 for 2 ? lb                                                            $10.00 each

1- set SBC Water pump spacers, ? thick                                                                      $10.00

1- used TH400/PG with 400 output QD coupler half                                                        $50.00

2- System 1 #102700 filter elements (4? inline unit)                                                      $30.00 each 

1- System one Filter element for large spin on filter fine                                                  $30.00

1- System one Filter element for large spin on filter coarse                                              $30.00

2- Peterson Filter elements for 400 series filter, 75 micron, no bypass                           $25.00 each

1- used Stef?s??? Dry Sump tank, ugly, multiple fittings, perfect for dyno use.                      $50.00

1- new DJ SFI-15 gloves Small Black                                                                           $80.00

1- new Simpson SFI-15 gloves Large Black                                                                  $100.00

1- barely used Simpson SFI-15 gloves Small Black                                                          $50.00

1- used 40 Spline Gundrilled Titanium Driveshaft, 12? Long                                                 $500.

2- used 40 Spline Male Aluminum Couplers, 3 ?? long, ugly but 100% usable                  $100 each

7- #16 male flare Tees, REAL AN fittings                                                                   $20.00 ea.

100?s of new REAL AN Hose ends, #4 straight, steel nut, aluminum body, for use with industrial hoses, not all racing hose                                                                                                                                 $3.00 ea

100?s of new REAL AN Hose ends, #6 straight, steel nut, aluminum body, for use with industrial hoses, not all racing hose                                                                                                                                       $4.00 ea 

100?s of new REAL AN Hose ends, #8 straight, all aluminum, for use with industrial hoses, not all racing hose    $5.00 ea

100?s of new REAL AN Hose ends, #12 straight, all aluminum, for use with industrial hoses, not all racing hose  $7.00 ea

100?s of new REAL AN Hose ends, #16 straight, all aluminum, for use with industrial hoses, not all racing hose  $10.00 ea

7- Mark Williams Roll Cage bends, sharp 3? radius 1 ? x .065 4130 for dragster            $40.00 ea

5- 3/8? wire rope slings eye on each end 7?-10? long                                               $10.00 ea.

Electrical/Ignition Parts

1- New MSD 3412 6? Boot Guard                                                                            $25.00

1- New MSD 34069 Single replacement spark plug wire                                              $10.00

1- New Mr. Gasket #42S Fuel Pump, inline, street or off-road low HP                           $20.00

1- new Carquest #TH-10 Throttle position sensor                                                      $10.00

4- new MSD 3/8-24 crank trigger pickups                                                                $100 each

1- new FIE 3/8 smooth crank trigger pickups straight                                                 $100.00 each

1- used FIE 3/8 smooth crank trigger pickup straight                                                  $50.00

2- new 6 ?? MSD crank trigger wheels for Chevy                                                    $100 .00 each

1- new electric alarm siren    screech-beep-honk-howl-bleep                                       $5.00

1- new MSD #7552 shift lite                                                                                  $30.00

1- new Autometer #2356 Volt Gauge                                                                      $12.00

1- new Carquest E8012S Electric Fuel Pump, Inline, street or off-road low HP                    $40.00

Fuel Injection Parts

9- new Hilborn ?-20 AS style nozzles, 3 ?? long, modified to take drop in orifices.           $200.00

8- new Enderle 32 nozzle jets                                                                                   $20.00

7-new Enderle 28 nozzle jets                                                                                    $15.00

1- new Enderle idle stop for splined shaft as on a hat injector                                          $7.50

8- used Hilborn #47A 1/8 NPT deflector tip nozzles straight                                          $100.00

8- used Hilborn #20A 1/8 NPT deflector tip nozzles 90 degree 4 left/4 right                     $100.00

7- used Kinsler 707 1/8 NPT deflector tip nozzles 90 degree all pointed down                     $50.00

Enderle Dual 4 barrel splined shaft linkage, 2 @12?, 1 @ 1 ??                                    all for $7.50

10- used Enderle 27 FLOWED nozzle jets with screened inlets                                          $100.00

11- used Enderle hat nozzle bodies, long brass                                                              $70.00

10- unique adapters for above, allows you to use in a ?-20 manifold                                $30.00

10- used Enderle hat nozzle bodies, no deflector tip                                                       $20.00

8- used Hilborn 16AS ?-20 nozzles, 7? long                                                                $200.00

8- used Engler 790 ?-20 nozzles, 1? long                                                                   $150.00

8- used Engler 480 ?-20 nozzles, 1? long                                                                    $150.00

8- used Kinsler 710 ?-20 nozzles, 1? long                                                                   $150.00

4- used Engler barrel valve spools, similar to Hilborn #54, will actually fit in Hilborn Barrel Valve $20 each

1- new Hilborn #58 barrel valve spool                                                                           $30.00

1- used Hilborn barrel valve spool, modified #54, would work like a #56                               $10.00

Racepak Parts

1- new 7? Analog cable, for VNET systems                                                                     $49.00

1- new Driveshaft RPM Sensor fro SC1000                                                                      $88.00

1- new Analog Box square cover                                                                                    $4.00

1- new 18? SC1000 Analog Box Cable                                                                             $49.00

2- new VNET Bulkhead Connectors                                                                           $59.00 each

1- used 0-600 Head temp sensor only                                                                            $50.00

1- used pigtail for MSD 12 or 20 Amp Mag with Inductive pickup for V300/V500                      $50.00

1-used 25? 2 pin extension cable, Engine RPM                                                                   $10.00

1-used 59? 3 pin extension cable, Clutch RPM                                                                   $15.00

1- new 7? VNET cable                                                                                                   $56.00

1- used 10? VNET cable, clip broken                                                                                 $10.00

1- new 8? VNET cable                                                                                                   $58.00

2- used 9? VNET Tee Connector, clip broken                                                                $10.00 each

1- used 36? VNET Tee Connector, clip broken                                                                   $10.00

1- used start switch for V300/V300SD 2 pin                                                                     $10.00

1- used Analog Module, Shock Travel                                                                              $75.00

1- new VNET sensor 0-75 psi                                                                                        $179.00

1- used 0-75 psi VNET sensor & module                                                                          $200.00

1- used VNET bulkhead connector                                                                                  $30.00

1- new Analog Module, LF Shock Travel                                                                          $135.00

1- new Analog Module, RF Shock Travel                                                                          $135.00

1- new Throttle Position Module VNET                                                                             $135.00

2-new Driveshaft RPM sensors for V300SD                                                                       $125.00 each

1-used VNET sensor 0-500 PSI tested OK                                                                       $150.00

1-used 0-15 PSI VNET module and sensor                                                                       $200.00

1- new 9? VNET Tee Connectors                                                                                     $54.00 each

4- new Female VNET caps                                                                                             $11.00 each

1- used Female VNET cap                                                                                               $5.00

4- new Male VNET caps                                                                                                $11.00 each

1- new Female Analog cap                                                                                             $7.00

2- new Male Analog caps                                                                                              $7.00 each

2- used Clutch RPM Sensors for V300SD                                                                       $100.00 ea.

1- used 0-10 GPM #8 Aluminum Flow Meter & Module                                                     $500.00

1- used 0-300 degrees Liquid Temp Sensor & Module                                                      $125.00

1- used 0-300 degrees Liquid Temp Sensor only                                                              $40.00

1-used 19? 3 pin extension cable, Engine RPM                                                                 $10.00

1- used 2? VNET Cable good shape                                                                                $35.00

1- used 4? VNET Cable good shape                                                                                $40.00

1- used 6? VNET Cable good shape                                                                                $42.00

1- used Analog Box for VNET with 3- 500 psi sensors                                                      $850.00

1- used Analog Box for VNET with 1 vac, 2- 200 psi, and 1- 300 psi sensors                      $1050.00

  Tires/Wheels

3- used 17? inner tubes                                                                                               $4.00 each

2- used 18? inner tubes                                                                                               $4.00 each

4- new 17? inner tubes                                                                                                $15.00 each

2- new 18? inner tubes                                                                                                $15.00 each

Trailer Parts

1-  new 2 5/16 ball autolock gooseneck hitch on round 4? tube                                          $150.00

1- new Winegard crank-up satellite dish #RM-4610                                                          $100.00

2- new 4? x 4 degree leaf spring wedges                                                                           $5.00     

1- new slipper spring, 2? wide, 5 leaves, 26 1/8? from center of 9/16? eye to inside of hook on other end, rated at 3,500 lbs each.                                                                                                         $20.00

1- anti-sway control for tag trailer used                                                                            $20.00

1- used 2? receiver hitch part.  The piece that goes into your receiver tube, that the load leveling hitch bolts to.  2? solid steel, 90 degree bend with gusset, drops 10?                                                    $20.00

Site design by Drag Strip Girl Designs

Neil & Parks Racing Ent.

All logos and images are reserved.