785-654-3440
9341 W. HWY K-31 BURLINGAME, KS 66413
Dragster Saddle Motor Mounts Dragster Saddle Motor Mounts Installed Dragster Saddle Motor Mounts Installed

Dragster Saddle Motor Mounts

Call to order

Saddle Motor Mounts are a light weight and strong system designed as a quick way to remove and secure your motor in a dragster. Just loosen the T-Bolt clamps, slide them out of the way and you're ready to pull the engine. Setting the motor back down in the frame is super easy, they make alignment a breeze! Saddle mounts can be used with, or without the tube doublers depending on application, if you wish to reinforce the frame in the mount area they work great.

Made from 4130 steel, saddles are available to fit three different tube sizes, 1 1/4", 1 3/8" and 1 1/2" tube for $6.00 each. Angle cut doublers are available to fit over 1", 1 1/8" and 1 1/4" dia. tubing and are $6.75 ea.

Designed to work with our T-Bolt Clamps and tabs for the motorplate such as 01330 Motor Mount Tab, 00010 Large Universal Tab, or 00030 Small Universal Tab.

Related Products